100T Four Column molding press machine for auto parts
Pre-sales Service
1. Inquiry and consulting
2. Recommend the most suitable machine according to customer's
purpose
3. Factory visiting welcomed
After-sales Service
1. Training how to install the machine
2. Training how to use the machine
3. Warranty 2 year
4. Engineers available to service machinery oversea
The main performance characteristics:
1. The pressing process of the hydraulic press for plastic, such as
stamping, bending, flanging, drawing etc..
2. Can be engaged in correction, compression, plastic products and
powder products.
Performance characteristics:
Three beams and four columns structure of this machine,Economical
and practical, easy to maintain.
Hydraulic control adopts integral cartridge valve design,Reduce
impact force and leakage point.Reliable operation and long service
life.
It can realize two actions of constant pressure and constant
travel.
The pressure and stroke can be adjusted according to the production
requirements within the specified range.
Manual and semi-automatic operation modes Adopt button centralized
control
| specification | Unit | 40T | 63T | 100T | 160T | 200T | 315T | 500T | 630T | 1000T | 1250T | 1600T | 2000T |
| Nominal force | KN | 400 | 630 | 1000 | 1600 | 2000 | 3150 | 5000 | 6300 | 10000 | 12500 | 16000 | 20000 |
| Ejecting force | KN | 63 | 100 | 250 | 250 | 400 | 630 | 1000 | 1000 | 1600 | 1600 | 2400 | 2400 |
| Max working pressure of fluid | Mpa | 22 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Slider Stroke | mm | 400 | 500 | 500 | 500 | 700 | 800 | 900 | 900 | 900 | 900 | 900 | 1200 |
| Max opening Height | mm | 600 | 700 | 900 | 900 | 1120 | 1250 | 1500 | 1500 | 1500 | 1500 | 1600 | 2000 |
| Table Size | L-R | mm | 500 | 580 | 710 | 900 | 900 | 1200 | 1400 | 1500 | 1500 | 1800 | 2000 | 3000 |
| F-B | mm | 500 | 500 | 580 | 800 | 900 | 1200 | 1400 | 1500 | 1500 | 1600 | 1600 | 2000 |
| Ejecting stroke | mm | 120 | 160 | 200 | 200 | 250 | 300 | 350 | 350 | 400 | 400 | 450 | 450 |
| Speed of slider | Idle stroke | mm/s | 60 | 60 | 70 | 100 | 120 | 120 | 120 | 140 | 160 | 160 | 200 | 200 |
| Pressing | mm/s | 40 | 8-15 | 8-15 | 8-15 | 8-15 | 8-15 | 8-15 | 8-15 | 8-15 | 8-15 | 8-15 | 8-15 |
| Returning | mm/s | 80 | 70 | 70 | 80 | 90 | 90 | 90 | 100 | 120 | 120 | 120 | 120 |
| Motor powder | KW | 5.5 | 5.5 | 7.5 | 11 | 15 | 18.5 | 30 | 44 | 68 | 75 | 90 | 130 |
FAQ
Is it independent research and development production?
Yes!
We have a strong technical team and a complete modern production
workshop for
four columns hydraulic press,and has a number of patented
technology.
Is it possible to deliver in time?
Yes!
Our manufactory is very high degree of modernization, brand
positioning the global market,
production capacity is very strong, conventional models try to
ensure that the spot.
Whether to support OEM services, custom processing?
Yes!
We have always been in the principle of customer first,
you can tailor the design and provide a set of solutions.
Is the machine voltage adjustable and the pressure is adequate?
Yes!
The steel forming hydraulic press motor uses three-phase power and
the voltage is set according to your local voltage.
Is it possible to visit your factory? Is the traffic convenient?
Yes!
